English – 45
setting static ip
In the <PORT>fi elds, set up port numbers.
<HTTP Port>: A HTTP port used to connect to a camera using the
Internet browser. The default value is 80. The HTTP
port value can be changed by using the up/down
button to the right.
The HTTP port number starts with 80 and
increases/decreases to 10000, 10006, 10012…
<Device Port>: A port used to control video transmission. The
default value is 60001(TCP).
<TCP Port>: A port used to transfer video using TCP protocol.
The default value is 60002(TCP).
<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).
<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).
<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is
60005(UDP).
Enter your password.
The default password is “4321”.
The password is the camera login password of the root user.
Click the [OK] button.
The manual network setting is fi nished.
The camera is set to the manually entered IP and is restarted.
If more than one camera are connected to an IP Router
Set the IP and port settings for camera differently.
Items 1st Camera 2nd Camera
IP Related
Items
IP Address
Subnet Mask
Gateway
192.168.1.200
255.255.255.0
192.168.1.1
192.168.1.201
255.255.255.0
192.168.1.1
Port Related Items
HTTP Port
Device Port
TCP Port
UDP Port
Upload Port
Multicast Port
80
60001
60002
60003
60004
60005
10000
10001
10002
10003
10004
10005
If <HTTP Port> is not set to 80,the user must specify the port number as well as the IP address in the Address input box of
an Internet browser to connect to the camera.
ex) http://IP Address: HTTP Port
e.g.) http://192.168.1.201: 10000
4.
•
•
•
•
•
•
5.
•
•
6.
•
7.
❖
M
5 6
4
