32 – 36x Network Smart Dome Camera
how to use osd menu
SCHEDULE SETUP
MASTER ENABLE [ON/OFF]
Decide whether Schedule function is active or not.
CLEAR SCHEDULE [CANCEL/OK]
Delete all data in current Menu
EDIT SCHEDULE Start editing Schedule.
Edit Schedule
c After move the Cursor to the number by using
Up/Down keys, press ENTER Key to edit.
d Each fi eld can be selected by Left/Right keys
and the values in the fi eld are changed using
Up/Down keys.
•
•
•
❖
The meaning of each value:
DAY Days: MON TUE WED THU
FRI SAT SUN
WKD: Weekday
ALL: All days(Everyday)
TIME 24hour Format
ACT PRS(Preset), AUP(Auto Pan),
PTN(Pattern), SCN(Scan),
HOM(Home)
ON/OFF Decide to make this rule effective or
not
If you fi nish a rule, press ENTER key to select
another rule.
Repeat this procedure to fi ll up the schedule in
mind.
e Example
The second rule means camera will move
to Preset 12 position at 7:35 on every
Wednesday.
* Note: If there are rules confl icts to each other, the
higher number is, the higher priority has.
* Note: If you assign undefi ned function, there will be
no action.
* Hint: Using reserved Preset, you can make various
schedules. For example, PRS179 are PRS178 are
Day and Night mode respectively.
(Refer to Reserved Preset(page 19) List in this
manual.)
–
SCHEDULE SETUP
MASTER ENABLE ON
DAY TIME ACT NO ON
1 UNDEFINED
2 UNDEFINED
3 UNDEFINED
4 UNDEFINED
5 UNDEFINED
6 UNDEFINED
7 UNDEFINED
BACK
SCHEDULE SETUP
MASTER ENABLE ON
DAY TIME ACT NO ON
1 UNDEFINED
2 UNDEFINED
3 UNDEFINED
4 UNDEFINED
5 UNDEFINED
6 UNDEFINED
7 UNDEFINED
BACK
SCHEDULE SETUP
MASTER ENABLE ON
DAY TIME ACT NO ON
1 MON 00:00 HOM OFF
2 UNDEFINED
3 UNDEFINED
4 UNDEFINED
5 UNDEFINED
6 UNDEFINED
7 UNDEFINED
BACK
SCHEDULE SETUP
MASTER ENABLE ON
DAY TIME ACT NO ON
1 MON 01:20 HOM ON
2 WED 07:35 PRS 12 ON
3 THU 11:40 SCN 3 ON
4 SAT 15:17 PTN 1 ON
5 WKD 23:00 HOM ON
6 UNDEFINED
7 UNDEFINED
BACK
