A SERVICE OF

logo

14 – 36x Network Smart Dome Camera
installation
9. After checking the orientation of one touch
connector in the upper housing, press the PTZ
mechanism into hook in the upper housing.
10. To lock the PTZ mechanism to the upper
housing, press the two black handles till it sounds
snap.
11. Close the dome cover. Care must be taken to
locate dome cover by matching the “Arrow
mark.
12. Tighten four screws on the dome cover in
sequence as shown in the picture bellow.
To maintain the best sealing, the torque of each screw
must be in the range between 0.5 ~ 1.0 N·m
(0.37 ~ 0.73 lbf·ft).
G
G
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
1
2
3
4