A SERVICE OF

logo

12 – 36x Network Smart Dome Camera
installation
RS-485 Termination Resistor
Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when you
have trouble with long Daisy chain style connection,
turn ON this termination switch of last camera.
Pin 8 : RS-485 Termination Resistor (ON/OFF)
INSTALLATION USING POLE
MOUNT BRACKET
1. Using the paper template, mark the holes on the
wall.
2. After drilling the holes, fi x the four anchor bolts
into the holes.
3.
After locating the wall mount bracket on the
anchor bolts properly. Tighten the nuts for anchor
bolts
4.
Connect cables to terminal blocks and BNC in the
Network box. See the cabling in the next section.
123456
ON
ON
78

