126
Reset Phone
Reset Phone returns all setup options to their factory default values.
Important!: Contact US Cellular Customer Service before using the Reset Phone option.
1. In standby mode, press the MENU ( ) key, then press (for
Settings) and for Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, the press for Reset Phone. A prompt appears in
the display asking if you wish to restore default settings (except for the
Contacts and Voice Dial).
3. Use the navigation keys to highlight Yes or No, then press .
Call Options
Auto Retry
Auto Retry automatically re-dials a number if the connection fails. Depending upon
your location, the number of times your phone automatically dials the number may
vary.
1. In standby mode, press the MENU ( ) key, then press (for
Settings), (for Call Options), and for Auto Retry. The Auto
Retry sub-menu with the following options appears in the display:
•Off
• Every 10 sec
• Every 30 sec
• Every 60 sec
2. Use the navigation keys to highlight the desired setting, then press .
Data
Use the Data menu to configure data connection speed and automatic detection
settings.
Auto Detect
Select phone options for receiving data or voice, or set data reception to off.
1. In standby mode, press the MENU ( ) key, then press (for
Settings), (for Call Options), and for Data.
The following Data menu items appear in the display:
OK
wxyz
def
pqrs
OK
OK
wxyz
ghi
@
OK
OK
wxyz
ghi
abc
