28 Section 2A. Device Basics
ⅷ Menu: Accessed by pressing Menu (), provides
you with the following options:
Ⅲ Open: Allows you to display information specific to
the current caller (if they have been previously
entered into the Contacts list).
Ⅲ Send Text Message: Allows you to send a text
message to the currently entered (or selected)
number.
Ⅲ View: Allows you to filter your onscreen list of
numbers by one of three criteria: Calls and
Contacts, All Calls, or Speed Dial.
● The Speed Dial filter allows you to enter a
number (1-99) and then display any speed
dial entries which match the specified speed
dial location. Press to dial the speed dial
number. (See “Assigning Speed Dial
Numbers” on page 76.)
Answering Calls
1. Make sure your device is on. (If your device is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.
– or –
Press Answer (left softkey). (Depending on your
settings, you may also answer incoming calls by
pressing any number key. See “Call Options” on
page 47. for more information.)
Tip
To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning Speed
Dial Numbers” on page 76.) (This feature will not work
when you are roaming off the Sprint National Network;
when roaming you must dial using eleven digits
[1 + the area code + the seven-digit phone number.])
I325.book Page 28 Tuesday, December 11, 2007 11:23 AM
