58
q Set the mode dial to one of the
following [ • • ] and press the
WB button.
w Press the or button to select the
white balance (AUTO • • • •
) and press the ENTER button.
e Press the shutter release button to
shoot the image.
Important
Note
• The color tones of a subject will vary depending on weather conditions
or light source (tungsten light or fluorescent light).
Note
• In auto mode, subjects lacking in white tones may not achieve an
appropriate white balance. When shooting such subjects, add a white
object to the composition.
• The flash will not fire in the following white balance modes:
(daylight), (overcast), (tungsten light), and (fluorescent light).
• Enable the keep settings mode to save the white balance mode
setting. See “Keep Settings” → (p.99).
WHITE BALANCE
BACK:CANCEL SEL.:ENTER
AUTO
28
