61
Advanced Shooting
3
w Press the or button to select +/–
[Exposure Compensation] and press the
ENTER button.
The exposure compensation settings menu will
be displayed.
Note
• To cancel the operation and return to the
record menu, press the MENU button.
e Press the zoom button to change the
compensation level.
Increasing the Compensation Level in 0.5 EV Steps
Press the ( ) button. Keep pressing the
button increases the compensation level fast.
Reducing the Compensation Level in 0.5 EV Steps
Press the ( ) button. Keep pressing the
button reduces the compensation level fast.
r Press the shutter release button to shoot
the subject.
When you press the shutter release button
lightly (halfway), the LCD monitor switches to a
normal display. Press down the shutter release
button fully to shoot the subject.
When the shooting ends, the setup menu is
displayed again on the LCD monitor. To accept
the new adjustment level, press the ENTER
button; to cancel it, press the MENU button to
return to the record menu. Then, press the
menu button once again to exit the record
menu.
Note
• The exposure compensation level setting is canceled when you turn the
power switch off. Enable the keep settings mode to save the exposure
compensation level setting. See “Keep Settings” (p.106).
How To Cancel the Exposure Compensation Setting
Follow the above procedures and set the compensation level to [±0.0] in step e.
MENU
[
RECORD
]
RECORDING MODE :
WHITE BALANCE :AUTO
+
/– :OFF
FOCUS :AUTO
DATE IMPRINT :OFF
REDEYE REDUCTION:OFF
MONOCHROME :OFF
INTERVAL MODE :OFF
BACK:MENU SEL.:ENTER
+/–
+2.0
–2.0
EV+0.0
BACK:MENU SEL.:ENTER
