5
Settings
73
Camera settings can be saved to O, P, and Q of the mode
dial and used repeatedly.
The following settings can be saved.
1 Set all of the settings to save on the camera.
2 Select [Save USER Mode] in A4 menu and
press D.
The [Save USER Mode] screen appears.
3 Select [Save Settings] and
press D.
The [Save Settings] screen
appears.
4 Select [USER1], [USER2] or [USER3], and press
D.
5 Select [Save] and press E.
The screen of Step 3 reappears.
u Caution
• [Save USER Mode] cannot be selected when the mode dial
is set to T.
t Memo
• The settings saved as USER mode can be displayed on the
monitor when you select [Check Saved Settings] in Step 3.
• To reset the settings to the default values, select [Reset
USER Mode] in Step 3.
You can change the name of the USER mode in which you
saved settings.
1 Select [Rename USER Mode] in Step 3 of
“Saving the Settings” and press D.
The [Rename USER Mode] screen appears.
2 Select [USER1], [USER2] or [USER3], and press
D.
The text-entry screen appears.
3 Change the text.
Up to 18 single-byte
alphanumeric characters and
symbols can be entered.
Available operations
Saving Frequently Used Settings
A4
Exposure Mode (except
for T / C)
Sensitivity
EV Compensation
AE Metering
AF point
Flash Mode
Drive Mode
White Balance
Custom Image
A1-4 menu settings (with
exceptions)
E1-4 menu settings
Saving the Settings
Save USER Mode
Save Settings
Rename USER Mode
Check Saved Settings
Reset USER Mode
Editing a Setting Name
ABCD Moves the text selection cursor.
R Moves the text input cursor.
J Switches between upper and lower case
letters.
E Enters a character selected with the text
selection cursor at the position of the text
input cursor.
L Deletes a character at the position of the
text input cursor.
Cancel
Delete One Character
Enter
Finish
Rename USER Mode
Text selection cursor
Text input cursor
