3
Shooting
58
It allows you to adjust the composition of your image using the
Shake Reduction mechanism. Use this when you want to adjust the
composition, such as when using a tripod during Live View shooting.
1 Select [Live View] in A3 menu and press D.
The [Live View] screen appears.
2 Select [Composition Adjust.] and set to T.
3 Press F twice.
The camera returns to standby mode.
4 Press K.
Live View is displayed and the message [Adjust the
composition of the image] appears.
5 Adjust the composition.
The amount of adjustment (the
number of steps) is displayed at
the top right of the screen.
Available operations
6 Press E.
The camera returns to standby mode in Live View.
u Caution
• This function cannot be used in the following situations.
• When the drive mode is set to [Interval Shooting], [Interval
Composite] or [Interval Movie Record]
• While shooting with ASTROTRACER
t Memo
• The adjusted composition is saved even if Live View is ended
or the camera is turned off. To reset the saved adjustment
value when Live View is ended, set [Composition Adjust.] to
[Off] in [Memory] of the A4 menu. (p.75)
By shaking the Shake Reduction unit, moiré reduction effect
simulating that of a low-pass filter can be achieved.
1 Select [AA Filter Simulator] in A3 menu and
press D.
2 Select [TYPE1] or [TYPE2]
and press E.
u Caution
• This function cannot be used in the following situations.
• When [HDR Capture] is set
•In C mode
• When the shutter speed is faster than 1/1000 seconds, the full
effect of this function cannot be achieved.
Composition Adjustment
A3
ABCD Moves the composition (up to 24 steps).
R Adjusts the level of the composition (up
to 8 steps. Not available when the
amount of adjustment is 17 steps or
more).
M Resets the adjustment value to the
default setting.
Adjust the composition
of the image
0
0
0
Cancel
OK
Anti-Aliasing Filter Simulator
A3/v
Live View
Electronic Level
AA Filter Simulator
Shake Reduction
Input Focal Length
Cancel
123 4
Horizon Correction
OK
