2
Getting Started
34
Review the captured image on the monitor.
1 Press B.
The camera enters playback
mode and the most recently
captured image is displayed
(single image display).
2 Review the captured image.
Available operations
t Memo
• When Hv is displayed on the monitor, the JPEG
image that was just taken can also be saved in RAW format
(Save RAW Data).
Reviewing Images
C/Q to the left Displays the previous image.
D/Q to the right Displays the next image.
L Deletes the image.
R to the right
Magnifies the image (up to 16×).
Use ABCD to change the
display area.
Press M to return the display
area to the center.
Press E to return the display
area to the entire image.
R to the left Switches to the thumbnail
display (p.60).
d Switches between the SD1
card and SD2 card.
H Saves the RAW image (only
when the data is available).
1/
2000
F2.8
200
0.0
100-0001
G Changes the type of
information displayed (p.12).
