1
Introduction
24
E2
12. AWB in Tungsten Light
Sets the tungsten light color tone for when the white balance is
set to g (Auto White Balance).
Subtle
Correction
p.53
13. Color Temperature Steps Sets the adjustment steps for color temperature. Kelvin p.54
14. Superimpose AF Area
Sets whether to display the active AF point in red in the viewfinder.
On p.14
E3
15. AF.S Setting
Sets the action priority for when the focus mode is set to x
and the shutter release button is fully pressed.
Focus-priority p.43
16. 1st Frame Action in AF.C
Sets the action priority for the first frame when the focus mode is
set to y and the shutter release button is fully pressed.
Release-
priority
p.43
17. Action in AF.C Continuous
Sets the action priority during continuous shooting when the
focus mode is set to y.
Focus-priority p.43
18. Hold AF Status
Sets whether to maintain the focus for a certain amount of time
when the subject happens to move out of the selected focusing
area after being focused.
Off p.43
19. AF with Remote Control
Sets whether to use autofocus when shooting with a remote
control unit.
Off p.49
20. Release While Charging
Sets whether to release the shutter while the built-in flash is
being charged.
Off p.41
21. Color Space Sets the color space to use. sRGB –
E4
22. LCD Panel Illumination Sets the illumination for the LCD panel. High p.15
23. Save Rotation Info Sets whether to save rotation information when shooting. On p.62
24. Save Menu Location
The last menu tab displayed on the monitor is saved, and it is
displayed again the next time F is pressed.
Reset Menu
Location
p.17
25. Catch-in Focus
Sets whether to enable Catch-in Focus shooting when a manual
focus lens is attached, and the shutter is released automatically
when the subject comes into focus.
Off –
26. AF Fine Adjustment
Allows you to precisely fine tune your lenses with the camera’s
autofocus system.
Off p.45
27. Using Aperture Ring
Sets whether to enable shutter release when the lens aperture
ring is set to a position other than 9.
Disable p.83
Reset Custom Functions
Resets all the settings of the Custom Setting menu to the
defaults.
––
Menu Item Function Default Setting Page
