3
Shooting
55
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The camera returns to standby mode.
The outcome of Cross Processing varies each time a picture is
taken. If you take a cross processed image that you like, you
can save the Cross Processing settings used in that image so
that you can repeatedly use the same settings.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Select a and press E.
The camera will search for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select a number and press E.
The settings of the selected image are saved to Favorite 1
to 3.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.54), and selecting [Favorite 1 - 3] for the parameter.
AB Selects a parameter.
CD Adjusts the value.
Q Switches between [Contrast], [Contrast
Highlight Adjustment] and [Contrast Shadow
Adjustment].
R Switches between [Sharpness], [Fine
Sharpness] and [Extra Sharpness].
(Not available in C mode).
M Resets the adjustment value to the default
setting.
SaturationSaturation
CancelCancel OKOK
CheckCheck
Saving the Cross Processing Settings of a
Captured Image
Save as Favorite 1
Saves this image's Cross
Processing settings
100-0001
Save as Favorite 2
Save as Favorite 3
OK
Cancel
