Paper and Other Media
6
1
•
The size is supported and indicated on the tray dial. Be sure to set the pa-
per size dial to match the actual paper size loaded in the tray.
•
The size is supported but not indicated on the tray dial. You should set the
tray dial to “p”, and select the paper size with the control panel.
•
The size is supported but the paper size should be set with the control pan-
el. There is no dial on the tray.
See p.19 “Loading Paper in the Bypass Tray”
See p.24 “Loading Envelopes”
•
The size is supported, but it should be set as a custom size using the control panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
The following sizes are supported:
• Bypass Tray: approximately 3.54 - 12.01 inches in width, and 5.83 - 17.01
inches in length.
• Paper Feed Unit (Tray 2/3): approximately 7.17 - 11.69 inches in width,
and 6.3 - 17.01 inches in length.
•
The size is not supported.
Foolscap F4 K
8
1
/
2
× 13
×
F/GL K 8 × 13 ×
Com#10 Env K
4
1
/
8
× 9
1
/
2
××
C5 Env
K
6.38 × 9.02
××
C6 Env
K 4.49 × 6.38 ××
DL Env K 4.33 × 8.66 ××
Monarch Env K
3
7
/
8
× 7
1
/
2
××
Custom Size - - ××
8K K
10
1
/
2
× 15.35
×
16K K
7.68 × 10
1
/
2
×
L
10
1
/
2
× 7.68
×
Feed direction
Size (inch)
Bypass Tray
Paper Tray (Tray1)
Paper Feed Unit (Tray2/3)
Envelope Feeder Unit
KirP4GB_Mainte-F6_FM_forPaper.book Page 6 Thursday, May 12, 2005 11:48 AM
