49
Nobeltec InSight Radar (IR2)
Operations Manual
Ghost Mouse Cursor: Shows a ghosted image of the mouse cursor in every chart
window. Most typically this would be used when the radar window and a chart
window are not in the same rotation angle so identifying targets is made simpler.
Degree Marks on Radar Rings: Turns on or off the degree values from the radar
range rings.
Vessel Centric Bearings: This option lets you change how the angle of the
Electronic Bearing Line is measured and displayed. The value set here is used in
the InSight window.
Radar Text Banner: This option changes how the radar information is displayed
when overlaid on an electronic chart. There are three options, Boxed, Full and
None. This option does not affect the display of the text itself only the back-
ground box.
Radar Resolution (not on all radars): This option is only available if you have
certain versions of the Nobeltec digital radar. Further, the options included are
based upon the particular Nobeltec digital radar you own. Click on the down
arrow to see what options are available. While, higher resolution gives an
improved radar image it generally consumes more memory.
Image Clipping: Some radars return the radar image in a square. This setting
allows you to keep the radar image as a square or clip the corners to see a more
standard circular radar image.
Always Open Radar Window: This option tells the Nobeltec software whether or
not to open a radar window by default each time the program launches.
Full Screen NavView Radar Console (Admiral only): In NavView, Nobeltec
Admiral’s non-windows look and feel, when the InSight radar is full screen the
Radar Console appears. There are three options from which to choose: Left,
Right and None.
Colors: The InSight radar allows you to change the colors of each overlayable item.
Use this to make objects more visible in different lighting situations or simply for
viewing preference. To adjust your color settings, use the slider tabs to adjust
the size of the color section. Once the slider tabs are in place, you can then right
click in any color section to open the Color Selection dialog box and select your
desired color settings.
Working with IR2
