7
This chapter is a review of what should have already been done through the
Installers Guide.
Installing InSight Radar (IR2)
Getting your radar up and running can be separated into two areas:
1. Installing the hardware
2. Setting up the Nobeltec software
Installing the Hardware
Included with your Nobeltec radar solution are installation and wiring instructions.
The majority of technical support issues revolve around incorrect installation.
Nobeltec strongly recommends using a qualified marine technician to install your
radar hardware. If you install the hardware components yourself, be sure to double
check your wiring and connections.
Depending on which radar solution you own, the radar may integrate to the
computer using the USB (Universal Serial Bus) port, or the Ethernet Network port.
Instructions for each of these connections is documented in the Installers Guide.
Refer to the Installer’s Guide for detailed
installation instructions
7
Setting up InSight Radar
2
chapter
