The Keypads 43
E-EQ-MX7OGWW-C MX7 User’s Guide
Mappable Diamond Keys
The Diamond keys can be programmed to perform specific functions. For example, using this
Settings option, you could set the Diamond 1 key to function as an ESC key. Setting the Diamond
1 key to function as an ESC key does not disable the function of the “standard” ESC key sequence
(Blue+Alt).
55 Key Diamond 1 32 Key Diamond 1 32 Key Diamond 2 / Diamond 3
Figure 28 Mappable Diamond Keys
The Diamond 1 key defaults to Field Exit on both keypads. All other Diamond keys and Diamond
Sticky keys have no assigned default value (i.e. their default value is <no key>).
To edit the diamond key parameters, tap
| Settings | Control Panel | Mappable Keys tab.
Change the parameter values using the drop down list and tap OK to save the changes. The change
takes effect immediately.
See Also: Appendix A “Key Maps”.
55 Key Keypad
The user can program the following key combinations using the Diamond 1 key:
+ + +
e.g. ESC
(Blue+Alt)
e.g. Home
(Shft+Down Arrow)
e.g. BackTab
(Orange+Tab)
e.g. Insert
(Blue+I)
Any combination of “standard” keypresses can be used.
