20 Optional Accessory Installation
MX7 User’s Guide E-EQ-MX7OGWW-C
Connecting the Multipurpose USB / Power Cable
C
B
Figure 16 Connect the USB / Power Cable to the MX7 Port
Connector A Squeeze the clips on the connector cable to open the catches in the connector
assembly. Firmly press Connector A into the connector at the base of the MX7.
Release the clips in the connector cable. Test the connection for stability before
connecting the B or C connector.
Connector B Firmly push the power cable connector pin into connector B until you hear a
slight click. Plug the 3-prong cable into an AC wall outlet.
Connector C Insert the USB Type A plug into an appropriate USB port on a desktop/laptop
computer for ActiveSync communication.
Connecting the Multipurpose RS-232 / Power Cable
C
B
Figure 17 Connect the RS-232 / Power Cable to the MX7 Port
Connector A Squeeze the clips on the connector cable to open the catches in the connector
assembly. Firmly press Connector A into the connector at the base of the MX7.
Release the clips in the connector cable. Test the connection for stability before
connecting the B or C connector.
Connector B Firmly push the power cable connector pin into connector B until you hear a
slight click. Plug the 3-prong cable into an AC wall outlet.
Connector C Align the RS-232 serial cable end carefully to an appropriate serial port on a
desktop/laptop computer for ActiveSync communication. Press the ends together
and hand tighten the screws on either side of the serial cable until the MX7 is
securely connected to the serial device.