32 Touchscreen Display
MX7 User’s Guide E-EQ-MX7OGWW-C
Touchscreen Display
Figure 23 Touchscreen Display
The touchscreen display is an active color LCD unit capable of supporting VGA graphics modes.
Display size is 240 x 320 pixels or ¼ VGA in portrait orientation. The touchscreen allows
signature capture and touch input. A pen stylus is included. The touchscreen responds to an
actuation force (touch) of 4 oz. of pressure (or greater).
The color display is optimized for indoor lighting. The display is off when the mobile device is in
Suspend mode and when the device is being powered by the backup battery only.
Applying the Protective Film to the Display
First, clean the display of fingerprints, lint particles, dust and smudges.
Remove the protective film from it’s container. Remove any protective backing from the film
sheet by lifting the backing from a corner of the film. Discard the backing.
Apply the film to the screen starting at one side and smoothing it across the display. If air bubbles
appear, raise the film slightly and continue smoothing the film across the display until it covers the
glass surface of the display.
If dust, lint or smudges are trapped between the protective film and the glass display, remove the
protective film, clean the display and apply the protective film again.
