XP20 User Manual
5-4
Janam Technologies LLC
To write symbols and other special characters:
• Make a vertical stroke from the bottom to the top in the text input area
• The shift indicator arrow appears in the lower right corner of the screen.
• While the arrow is visible, you can make the Symbols and other special characters shown below.
• When the arrow goes away, the punctuation mark appears.
TIP: Using an additional shift stroke to finish writing the character (as shown in the demo) is optional but
will make the character appear more quickly.
TIP: Samples of the character strokes are available in the Graffiti 2 help file. To view the help file, use the
full-screen pen stroke, dragging the stylus from the text input area to the top of the screen.
Use the Graffiti 2 tuner
The Graffiti 2 tuner provides alternate strokes for making the T, P, Y, and $ characters. For example, you
may want to form the letter “T” by using strokes similar to a space and an “L.” But if this technique is
difficult to control, you can turn off this option.
To use the tuner:
1. Tap the applications icon.
2. Tap system from the pick list in the upper right corner of the screen.
3. Tap on the prefs icon.
4. Select Graffiti 2 tuner from the pick list.
5. Tap on one of the letters available for you to tune.
6. On the next screen, tap the box to place a check for the characters you wish
to change.
7. Tap done.
Use Graffiti 2 gestures
Gestures are editing commands, such as cut, paste and undo. The ShortCut
command is explained further in the next section. To use gestures, draw the
strokes on the right.
