EN
Appendix C Printer Memory and Expansion 147
Installing Memory
CAUTION
Static electricity can damage dual in-line
memory modules (DIMMs). When
handling DIMMs, either wear an
antistatic wrist strap or frequently touch
the surface of the DIMMs’ antistatic
package, then touch bare metal on the
printer.
If you have not already done so, print a
self test/configuration page to find out
how much memory is installed in the
printer before adding more memory. See
Self Test/Configuration Page.
Note
If the self test/configuration page does
not print in your language, see Printing
Special Pages.
1 After the self test/configuration
page is printed, turn the printer off
and disconnect the power cord.
2 Open the interface cable door by
pressing on the release tabs and
swinging the door outward.
Disconnect all interface cables.
3 Open the top cover.
4 Press the release button and slide
the right side panel forward until the
alignment arrows line up.
5 Pull the panel away from the printer,
exposing the available DIMM slots.
Continued on the next page.
1
2
3
4
5
