EN
Chapter 4 Problem Solving 97
Bad Connection The cable between the printer and
computer has a bad connection or the
cable is of poor quality. Check the cable
connections to see if they are secure.
Make sure you are using a high-quality
cable.
Memory
Configuration Error
! Reprint the job.
! Turn the printer off. Press and hold
the GO button. Turn the printer on
and continue to hold the GO button
for approximately five seconds, but
no longer than fifteen seconds. The
Attention light will come on during
this process. Release the Go button.
If both the Attention and Ready
lights came on before you released
the Go button, then you must repeat
the procedure.
! Replace DIMMs (memory).
! Contact your HP service
representative. See HP Customer
Care (Service and Support) or
Worldwide Sales and Service
Offices.
Continuable Attention Errors (continued)
Type of Error Light Pattern Recommended Action
