Inserting Oscilloscope Waveforms
Command
:WLISt:INSert <module_spec>,<label_name>
This inserts a waveform from an oscilloscope to the timing waveforms display.
<module_spec> {1|2|3|4|5|6|7|8|9|10} slot in which master card is installed
<label_name> string of one alpha and one numeric character, identical to that on the
oscilloscope waveform display.
Example OUTPUT XXX;":WLIST:INSERT 3, ’C1’"
LINE
Command :WLISt:LINE <line_num_mid_screen>
The LINE command allows you to scroll the timing analyzer listing vertically.
The command specifies the state line number relative to the trigger. The
analyzer then highlights the specified line at the center of the screen.
<line_num_mid_
screen>
integer from -516096 to +516096 (HP 16554A)
or -1040384 to +1040384 (HP 16555A)
or -2080768 to +2080768 (HP 16555D).
Example OUTPUT XXX;":WLIST:LINE 0"
WLISt Subsystem
LINE
4–7
