A SERVICE OF

logo

Open as PDF
next previous
ARM
Command :MACHine{1|2}:ARM <arm_source>
The ARM command specifies the arming source of the specified analyzer
(machine). The RUN option disables the arm source. For example, if you do
not want to use either the intermodule bus or the other machine to arm the
current machine, you specify the RUN option.
If you are using an HP 16500C mainframe, you can set up OR’d Triggering by
arming the module from INTermodule when intermodule is set to Group Run
with OR TRIGGER. See the HP 16500C Programmer’s Guide for details.
<arm_source> {RUN|INTermodule|MACHine{1|2}}
Example OUTPUT XXX;":MACHINE1:ARM MACHINE2"
Query :MACHine{1|2}:ARM?
The ARM query returns the source that the current analyzer (machine) will
be armed by.
Returned Format [:MACHine{1|2}:ARM] <arm_source>
Example OUTPUT XXX;":MACHINE1:ARM?"
MACHine Subsystem
ARM
3–5