A SERVICE OF

logo

Open as PDF
next previous
REMove
Command :MACHine{1|2}:SWAVeform:REMove
The REMove command clears the waveform display before building a new
display.
Example OUTPUT XXX;":MACHINE1:SWAVEFORM:REMOVE"
TAKenbranch
Command MACHine{1|2}:SWAVeform:TAKenbranch {STORe|NOSTore}
The TAKenbranch command allows you to control whether the states that
cause branching are stored or not stored. This command is only available
when the acquisition mode is set to manual.
Example OUTPUT XXX;":MACHINE2:SWAVEFORM:TAKENBRANCH STORE"
Query MACHine{1|2}:SWAVeform:TAKenbranch?
The TAKenbranch query returns the current setting.
Returned Format
[MACHine{1|2}:SWAVeform:TAKenbranch] {STORe|NOSTore}<NL>
Example OUTPUT XXX;":MACHINE2:SWAVEFORM:TAKENBRANCH?"
SWAVeform Subsystem
REMove
8–10