Step 20. Installing the Software Drivers
Before you use this printer with your software applications, you must
install printing software. The HP LaserJet 5Si MX Printer software is
included with the printer on CD-ROM and contains the software for
running the printer in various environments. Instructions for installing
the printer software follow.
The CD-ROM includes software designed for end users operating in
the following environments:
•• Windows 3.1
•• Windows 95
•• Windows for Workgroups 3.11
•• Windows NT 3.51 and 4.0
•• IBM OS/2 version 2.0 or greater
•• Macintosh System 7 or greater (Only appears in the CD-ROM
directory when viewing in a Macintosh environment.)
The printing software also includes software for network
administrators using the following network operating systems:
•• Novell NetWare 3.x or 4.x
•• Windows NT 3.51 and 4.0
•• IBM LAN Server for OS/2 3.0 or greater
•• Apple AppleTalk
Note
A table of the CD-ROM directory structure is located on page 37. If
you want to install software or a language other than the default, use
this table to find the path for the operating system and language for
which you want to install printing software.
Windows
If you are operating in a Windows environment, the setup software will
detect the version of the operating system that you are running. The
software will be installed in the language that you have selected in your
Windows Control Panel.
To begin the setup installation for Windows, perform the following
instructions.
1
Close all applications. Turn off virus checkers and terminate stay
resident (TSR) programs. After installation, these programs can be
turned back on.
2 Exit and restart Windows.
3 Log onto your workstation with Supervisor or Admin privileges and
insert the CD-ROM into the CD-ROM drive.
EN Getting Started Guide - 33
