Optional Network Configuration
(continued)
10 Press [Items] to continue. Repeat steps 8 and 9 to configure the
remaining bytes of the IP address.
11 Repeat steps 8 through 10 to configure the subnet mask bytes (SM) ,
syslog server IP address (LG), default gateway (GW), and timeout
(TIMEOUT).
12 After completing this guide refer to the HP JetDirect Print Server
Software Installation Guide for additional configuration instructions.
13 If Novell or EtherTalk protocols will be used, continue with those
sections. Otherwise skip to Step 20.
Configuring Apple EtherTalk Phase Parameter
1 Press [Items]. CFG ETALK=NO * appears.
2 Press [+]. CFG ETALK=YES appears.
3 Press [Select*]. CFG ETALK=YES * appears.
4 Press [Items]. Phase = 1 or Phase = 2 appears.
5 Press [Items] to retain the value and continue, or press [+] to change
the phase parameter.
6 Press [Select*] to save the new value.
7 Press [Online]. You may want to configure the AppleTalk name and
assign a preferred EtherTalk zone. After completing this guide refer to
the HP JetDirect Print Server Software Installation Guide for further
configuration instructions on using the HP LaserJet Utility.
8 If Novell or UNIX protocols will be used, continue with those sections.
Otherwise continue to Step 20.
28 - Getting Started Guide EN
