Step 6. Changing or Installing the Control
Panel Overlay
To change the overlay to a
language other than English:
1 If you need to change the control
panel overlay, locate the overlay in
Box 1 and remove from its bag.
2 Make sure the power switch is off.
Gently lift up on the left and right
sides of the installed overlay.
3 Insert your thumbnail or a thin rigid
object in front of the overlay and
press toward the back of the printer,
then lift the front to remove.
4 To install the new overlay, position it
over the control panel, back side first.
5 Snap the overlay firmly onto the
control panel. Ensure that the overlay
lies flat.
EN Getting Started Guide - 11
