Computer feet
Description Spare part number
Rubber Feet Kit 438557-001
The computer feet are adhesive-backed rubber pads.
Memory module
Description Spare part number
1-DIMM, PC2-4200, 512 MB 438546-001
1-DIMM, PC2-4200, 256 MB 438545-001
1-DIMM, PC2-3200, 256 MB 438544-001
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 28).
Remove the external memory module:
1. Position the computer with the rear panel toward you.
2. Loosen the Phillips PM2.5×8.0 screw (1) that secures the memory/Mini PCI card module
compartment cover to the computer.
ENWW Component replacement procedures 31
