EPSON Stylus Color 900 Revision C
Disassembly and Assembly Disassembly Procedures 121
4.2.7.6 ASF Sensor Removal
1. Remove the ASF unit. (See Section 4.2.7.5.)
2. Viewing the ASF unit from the front, remove the bushing (left) fixed
at the left end of the shaft.
Figure 4-32. Left Bushing Removal
3. Release the hook securing the detection wheel and push the
detection wheel to remove.
Figure 4-33. Detection Wheel Removal
4. Disconnect the connector from the ASF sensor.
5. Using tweezers, release one of the hooks securing the ASF sensor,
and remove the ASF sensor.
Figure 4-34. ASF Sensor Removal
Bushing Fixing the Shaft
on the Left
LD Roller Shaft
Fixing Tab
D etection W heel
LD Roller Shaft
ASF Fram e (Left Side view )
ASF HP Sensor
