A SERVICE OF

logo

Using the Two-Tractor System
CAUTION:
Be sure the sprocket units are not too far apart.
If they pull your paper too tightly or tear the edges of the paper
holes, a paper jam may result. To remove any excess tension
in your paper, release the right sprocket and lock it again.
12. Close the top cover and the rear flap. The paper is now loaded
to the standby position.
13.
Turn on the printer. The POWER and PAPER OUT lights go on.
Also, either the front or rear tractor
arrow on the PAPER SELECT
indicator lights up, depending on which tractor was selected
when the printer was turned off last.
Paper
Handling
2-17