A SERVICE OF

logo

Open as PDF
next previous
Testing the Printer
12.
Press the
LINE
FEED/LOAD button to load your paper. (If the
paper does not load, the front tractor may not be selected. Press
the FRONT/REAR button to select the front tractor. This loads the
paper automatically.)
13.
Press the ON LINE button to start the self test. (The ON LINE light
does not go on.) A list of your printer’s DIP switch settings is
printed first, followed by a series of characters. The self test
continues until the paper runs out or you press the ON LINE
button.
14.
If the test results are satisfactory and you wish to stop the test,
press the
ON
LINE
button. If the test results are not satisfactory,
see page
l-24 for possible causes and solutions.
Note: To resume the test, press the ON
LINE
button again.
Setting Up the Printer
1-21