xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
25
DGS-3627:admin# disable ipif Intface_1
Command: disable ipif Intface_1
Success
enable ipif_ipv6_link_local_auto
Purpose Enable the auto configuration of link local address when no IPv6 address is configured.
Syntax
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Description Enable the auto configuration of link local address when there are no IPv6 addresses
explicitly configured. When an IPv6 address is explicitly configured, the link local address will
be automatically configured, and the IPv6 processing will be started. When there is no IPv6
address explicitly configured, by default, link local address is not configured and the IPv6
processing will be disabled. By enable this automatic configuration, the link local address will
be automatically configured and IPv6 processing will be started.
Parameters
ipif_name - Specifies the name of the IPv6 interface used.
all - Specifies that all the interfaces will be enabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Enable the automatic configuration of link local address for an interface:
DGS-3627:admin# enable ipif_ipv6_link_local_auto Intface_1
Command: enable ipif_ipv6_link_local_auto Intface_1
Success
disable ipif_ipv6_link_local_auto
Purpose Disable the auto configuration of link local address when no IPv6 address are configured.
Syntax
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Description Disable the auto configuration of link local address when no IPv6 address is explicitly
configured.
Parameters
ipif_name - Specifies the name of the IPv6 interface used.
all - Specifies that all the interfaces will be disabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Disable the automatic configuration of link local address for an interface:
DGS-3627:admin# disable ipif_ipv6_link_local_auto Intface_1
Command: disable ipif_ipv6_link_local_auto Intface_1
Success
