xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
275
DGS-3627:admin# show erps
Command: show erps
ERPS Information
Global Status : Enabled
Log Status : Disabled
Trap Status : Disabled
------------------------
R-APS VLAN : 4092
Ring Status : Enabled
West Port : 5 (Blocking)
East Port : 7 (Forwarding)
RPL Port : West Port
RPL Owner : Enabled (Active)
Protected VLANs : 100-300, 4093, 4094
Ring MEL : 2
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds
WTR Time : 5 minutes
Current Ring State : Idle
------------------------
R-APS VLAN : 4093
Ring Status : Enabled
West Port : Virtual Channel
East Port : 10 (Forwarding)
RPL Port : None
RPL Owner : Disabled
Protected VLANs : 200-220
Ring MEL : 2
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds
WTR Time : 5 minutes
Current Ring State : Idle
------------------------
R-APS VLAN : 4094
Ring Status : Enabled
West Port : Virtual Channel
East Port : 12 (Forwarding)
RPL Port : None
RPL Owner : Disabled
Protected VLANs : 250-300
Ring MEL : 2
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds
WTR Time : 5 minutes
Current Ring State : Idle
------------------------
Total Ring: 3
config erps trap
Purpose Used to configure the trap state of the ERPS.
Syntax
config erps trap [enable | disable]
Description This command is used to configure trap state of ERPS events.
Parameters
trap - Enable or disable trap state. The default value is disabled.
