show tech-support
CF-905
Cisco IOS Configuration Fundamentals Command Reference
July 2008
If you enter the ipmulticast keyword, the output displays, but is not limited to, these show commands:
• show ip dvmrp route
• show ip igmp groups
• show ip igmp interface
• show ip mcache
• show ip mroute
• show ip mroute count
• show ip pim interface
• show ip pim interface count
• show ip pim interface df
• show ip pim mdt
• show ip pim mdt bgp
• show ip pim neighbor
• show ip pim rp
• show ip pim rp metric
• show mls ip multicast rp-mapping gm-cache
• show mmls gc process
• show mmls msc rpdf-cache
Examples For a sample display of the output from the show tech-support command, refer to the documentation
for the show commands listed in the “Usage Guidelines” section.
Related Commands Command Description
dir Displays a list of files on a file system.
show appletalk traffic Displays statistics about AppleTalk traffic, including MAC IP traffic.
show bootflash Displays the contents of boot flash memory.
show bootvar Displays the contents of the BOOT environment variable, the name
of the configuration file pointed to by the CONFIG_FILE
environment variable, the contents of the BOOTLDR environment
variable, and the configuration register setting.
show buffers Displays statistics for the buffer pools on the network server.
show cdp neighbors Displays detailed information about neighboring devices discovered
using Cisco Discovery Protocol.
show cef Displays information about packets forwarded by Cisco Express
Forwarding.
show clns traffic Displays a list of the CLNS packets this router has seen.
show <command> | redirect Redirects the output of any show command to a file.
show context Displays context data.
show controllers Displays information that is specific to the hardware.
