Commands Listed in Alphanumeric Order
Programming Reference
VERSAJET
Command
Name
Function
Type
Command
Descriptions
Classification
Standard
Mode
Page
Mode
HT Print Position Horizontal tab Executing
LF Print Print and line feed Executing
FF Print Print and return to standard mode (in page mode) Executing Ignored
CR
Print Print and carriage return Executing
CAN Character Cancel print data in page mode Executing Ignored
ESC FF Print Print data in page mode Executing Ignored
ESC SP Character Set right-side character spacing Setting
ESC ! Character Select print mode(s) Setting
ESC $ Print Position Set absolute print position Executing
ESC % Character Select/cancel user-defined character set Setting
ESC & Character Define user-defined characters Setting
ESC * Bit Image Select bit-image mode Executing
ESC – Character Turn underline mode on/off Setting
ESC 2 Line Spacing Select default line spacing Setting
ESC 3 Line Spacing Set line spacing Setting
ESC ? Character Cancel user-defined characters Setting
ESC @ Miscellaneous Initialize printer
Executing+
Setting
22
