GS C 1
Programming Reference
VERSAJET
[Name] Select counter mode
[Format] ASCII GS C 1 aL aH bL bH n r
Hex 1D 43 31 aL aH bL bH n r
Decimal 29 67 49 aL aH bL bH n r
[Range] 0 ≤ (aL + aH x 256) ≤65535 (0≤ aL ≤255, 0≤ aH ≤255)
0 ≤ (bL + bH x 256) ≤65535 (0≤ bL ≤255, 0≤ bH ≤255)
0 ≤ n ≤ 255 , 0 ≤ r ≤255
[Default] (aL + aH x 256) = 1(aL = 1, aH = 0)
(bL + bH x 256) = 65535 (bL = 255, bH = 255)
n = 1 , r = 1
[Description] Selects a count mode for the serial number counter.
Count mode Conditions Minimum
Value
Maximum value
Count-up aL+aH x 256< bL+bH x 256
and n≠0 and r≠0
aL+aH x 256 bL+bH x 256
Count-down aL+aH x 256> bL+bH x 256
and n≠0 and r≠0
bL+bH x 256 aL+aH x 256
Count-stop aL+aH x 256= bL+bH x 256
and n≠0 and r≠0
- -
* aL, aH and bL, bH specify the counter ranges (maximum or minimum value).
* n specifies the stepping amount when counting up or down.
* r specifies the repetition number of printing for the same counter value.
145
