Commands Listed by Function
Programming Reference
VERSAJET
Function
Type
Command
Name
Command
Descriptions
Classification
Standard
Mode
Page
Mode
Print LF Print and line feed Executing
Print FF Print and return to standard mode (in page mode) Executing Ignored
Print CR Print and carriage return Executing
Print ESC FF Print data in page mode Executing Ignored
Print ESC J Print and feed paper (distance controlled by “GS P”) Executing
Print ESC d Print and feed
n
lines Executing
Line Spacing ESC 2 Select default line spacing Setting
Line Spacing ESC 3 Set line spacing Setting
Character CAN Cancel print data in page mode Executing Ignored
Character ESC SP Set right-side character spacing Setting
Character ESC ! Select print mode(s) Setting
Character ESC % Select/cancel user-defined character set Setting
Character ESC & Define user-defined characters Setting
Character ESC – Turn underline mode on/off Setting
Character ESC ? Cancel user-defined characters Setting
Character ESC { Turn upside-down printing mode on/off Setting (
)
Character ESC E Turn emphasized mode on/off Setting
Character ESC G Turn double-strike mode on/off Setting
16
