Settings Operations Operations
78
7.1.4 Wired Network
This option allows you to enable or disable the wired network connectivity, as
well as to perform Ethernet configuration.
To operate Ethernet configuration
1. Tap the Settings application on the MaxiSys Job Menu.
2. Tap the Wired Network option on the left column.
3. Tap the ON/OFF button to enable the Wired Network connection. If
the connectivity is enabled the button turns blue, or if disabled the
button turns gray.
4. Tap the
○
> button to the right of the Ethernet Configuration option,
a setup window displays.
5. Select a connection type:
DHCP – obtains the LAN IP address automatically
Static IP – allows manual input of IP address
6. If Static IP is selected, you need to enter the IP values manually.
NOTE: If you are not sure about the specific IP address values, please
contact your network administrator.
7. Tap Save to save the Ethernet configuration setting; or tap Cancel
to exit without saving.
8. Tap the Home button on the top left corner to return to the MaxiSys
Job Menu. Or select another setting option for the system setup.
7.1.5 Push Message
This option allows you to turn the Push Message function on or off. The Push
Message function configures the MaxiSys tablet to receive regular on-line
messages from the server for system update notifications or other service
information via the Internet. It is highly recommended to keep this function on
all the time, so you won’t miss out any new update for MaxiSys or event from
Autel. Internet access is required for receiving on-line messages.
