354 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:TRIGger:GLITch:SOURce
(see page 530)
Command Syntax
:TRIGger:GLITch:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:GLITch:SOURce command selects the channel that produces
the pulse width trigger.
Query Syntax
:TRIGger:GLITch:SOURce?
The :TRIGger:GLITch:SOURce? query returns the current pulse width
source. If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 313
• ":TRIGger:MODE" on page 319
• ":TRIGger:GLITch:LEVel" on page 350
• ":TRIGger:GLITch:POLarity" on page 351
• ":TRIGger:GLITch:QUALifier" on page 352
• ":TRIGger:GLITch:RANGe" on page 353
Example Code • "Example Code" on page 346
