Configuring Audio Settings (Tuning Wizard)
4-86 41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
IMPORTANT INFORMATION
Note: Before you begin using the Tuning Wizard, refer to the following information:
• Make sure you can directly access an Administrator IP phone.
• You will be asked to supply the destination phone number as part of the tuning
procedure. Have this number handy.
• After you place the call from the Administrator IP phone, someone must
answer the destination phone, and then “mute” the call. Unless the destination
phone is co-located, ask another person to assist you with the Tuning Wizard
procedure.
Use the following procedure to begin using the Tuning Wizard.
AastraLink Web UI
Step Action
1Select C
onfiguration->Regional Settings
2 Click on the <Tuning Wizard> button, located at the bottom of the menu.
The Tuning Wizard launches and the welcome screen appears. Click <Next> to begin using the
Tuning Wizard.
3 Specify settings for the following parameters, then click <Next>:
• Connection Type
Specify which type of phone lines connect to the AastraLink (and you are currently tuning) —
either PBX (private network) or PSTN (public switched telephone network).
•Line Boost
Specify the audio boost level used on these lines, as Standard, Full, or Extended.
• Number to Dial
Enter the destination phone number that the Tuning Wizard dials as part of the tuning procedure.
