Configuring Dial Plan Settings
4-34 41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
3 After a caller parks a call, the extension of the caller who parked the call will ring again to remind
them that they put a call on park.
In the “Parked Call Timeout” field, enter the time, in seconds, that the AastraLink Pro 160 waits
before it rings back to remind the IP Phone user that he parked a call.
This parameter is a global setting for all calls that are parked (not a per-call basis).
Valid values are 1 to 3600 (1 hour). Default is 45.
Note: A value of 0 for this parameter sets the Parked Call Timeout to 45 seconds (default).
4 To change the password for the administrator’s phone, specify a new password in the “Phone’s
Admin Password” field.
Warning: Changing the phones administrator password may result in all phones rebooting to accept
the changed password.
5 See the section, “Configuring Overhead Paging” on page 4-35 to set the Overhead Paging PIN
parameter.
6 Click <Save> to save your changes.
AastraLink Web UI
Step Action
