Configuring VoIP Settings
41-001190-01 Rel. 1.1, Rev. 00 4-61
Configuring AastraLink Pro 160 System and Network Parameters
Based on these parameters defined by the administrator, the dial prefix for each
AastraLink network in this example is as follows:
dial prefix Atlanta = 7 + 0 + (number)
dial prefix Boston = 7 + 1 + (number)
dial prefix Chicago = 7 + 2 + (number)
Once the AastraLink trunking information is mapped out, the administrator is
ready to configure the trunk between Atlanta and Boston, and does the following
steps:
1. Logs into the Atlanta AastraLink device (10.30.50.125).
2. Clicks the dial prefix for the destination end of the trunk. In this case, the
Boston AastraLink network: 7 + 1 + (number).
3. Specifies the destination hostname (10.50.60.135) and user name, and then
saves the changes.
The administrator is now ready to configure the other end of the trunk, and does
the following steps:
1. Logs into the Boston AastraLink device (10.30.60.135).
2. Clicks the dial prefix for the Atlanta AastraLink network: 7 + 0 + (number).
3. Specifies the destination hostname (10.30.50.125), and the same user name as
used for the Boston end of the trunk, then saves the changes.
At this point, the trunk between Atlanta and Boston is complete. To configure the
trunk between Atlanta and Chicago, the administrator repeats these steps, using
the Chicago dial prefix/hostname as the destination end of the trunk.
Boston AastraLink Pro 16
