Filter
Top Products
10. PROGRAMMING PROCEDURES
10.16 BAR CODE FORMAT
10-26
10.16 BAR CODE FORMAT
Menu Page: 2
Item No.: 6
With the SL-9000 scale, four kinds of bar code formats are available. These formats can be changed
freely.
When changing the above example format into the weigh format described in NOTE 1, use the
following procedure.
NOTES:
1. In this printer, the previously set bar code format is initialized to the following default by RAM clear.
Default Bar Code Format:
Weigh or Fix Price Format
By Count Format
Receipt Format
2 9 C1 C2 C3 C4 C5 C6 P2 P3 P4 P5 C/D
0 2 C2 C3 C4 C5 C6 PC/D P1 P2 P3 P4 C/D
0 2 C2 C3 C4 C5 C6 PC/D P1 P2 P3 P4 C/D
0 0 0 C2 C3 C4 C5 0 0 0 0 C6 C/D
0 2 0 0 0 0 PC/D P1 P2 P3 P4 P5 C/D
Current format
Flag UPC # Price Total check digit
Changed format
Flag UPC #
Price check digit or
weight check digit.
Total check digit
Example)
6
<MENU>
Page 2
PROG.
ESC.
<MENU>
Page 2
Main
<MENU>
(Move the cursor to
the column to be set.)
Select the format #.
Format # 1: WEIGH
Format # 2: BY COUNT
Format # 3: FIX PRICE
Format # 4: RECEIPT
ENTER
q
Set the flag.
ex) Enter 02 .
q
2 3 4 5 6
Switch over the setting
item. (refer to NOTE 8)
ex) Press the key twice to
select UPC # as a setting
item.
Enter an UPC #.
NEXT
PLU
or
(Left) (Right)
1 2 3 4
ENTER
1
Switch over
UPC # PC/D
Set price
check digit
Switch over
PC/D UPC #
Enter a price