Filter
Top Products
Features and Accessories
P7225 2.5 GHz 10X Active Probe User Manua l
9
Table 1: P7225 features and standard accessories (Cont.)
Feature/Accessory Description
Square pin
socket
Square pin socket. The square pin socket is
ideal for use with signal/ground pairs on 0.100
inch squareheader pins.
Attach the socket by gently pressing it into the
ground socket on the probe head.
Be sure to use the stabilization notch whenever
possible to avoid slipping and damaging the
probe or circuitry under test.
Tektronix part number: 016-1773-10 (pkg of 10)
SureToe adapter
SureToe probe adapter (4 ea). The SureToe
adapter is a pointed probe tip useful for probing in
dense circuitry. Attach the SureToe adapters the
same way as the push-in probe tips.
Do not force the adapter. Also, be careful not to
poke yourself with the sharp probe tip. SureToe
adapters can be used with any of the socketed
accessory leads.
Tektronix part number: ST501 (pkg of 12)
KlipChip
Y-lead adapter
SMT KlipChip. Use the SMT KlipChip test clips
to access fragile, dense circuitry.
You can connect the KlipChip test clips to a
Y-lead or three-inch ground leads. To connect,
press the lead socket into the KlipChip handle.
The KlipChip body turns freely, allowing better
probe orientation. To reduce stress and provide a
lower profile on components being tested, the
flexible sleeve of the KlipChip bends up to a
35 degree angle.
Tektronix part number: 206-0364-XX (2 each)