Filter
Top Products
Tanita TBF-560 Body Fat Monitor/Scale
8
Setting current date and time
NOTE: This unit makes a “beep” every time the Orange Set button is pushed and two “beeps” when the input data is confirmed.
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
MALE
FEMALE
WEEK
MONTH
ATHLETE
TIME
DATE
DOB
1. Setting the current year
When the batteries are installed, the
display will flash an arrow pointing
to “DATE” and two dashes where
the “year” is to be stored. Use the
Green Up/Down buttons to specify
the last two digits of the year. Then
press the Orange Set button.
2. Setting the current month
Once the year is set (1998, in the
example shown above), then use the
Up/Down buttons to specify the
month. Then press the Set button.
3. Setting the current day
Once the month is set (October, in
the example shown above), then use
the Up/Down buttons to specify the
day. Then press the Set button.
4. Setting the current hour
Once the day is set (15, in the
example shown above), then use
the Up/Down buttons to specify
the hour (indicate AM or PM).
Then press the Set button.
Example: For 5 pm, the display
shows “P 5”.
5. Setting the current
minutes
Use the Up/Down buttons to
specify the minutes. Then press
the Set button. Example: For 35
minutes, the display will show “35”.
6. Completing the sequence
Then, press the Set button. Two
“beeps” will be heard and the
confirmed data will flash. The
power will automatically shut off.
NOTE: Midnight is indicated by “A12:00” and noon is indicated by “P12:00”.