Filter
Top Products
Product specifications
Output Items
Measurement System
Measurement Frequency
Impedance
Measurement
Weight
Measurement
Input Items
8 polar Bioelectrical Impedance Analysis
50kHz
Measurement Current
500µA
Electrode Material
Pressure Contact Stainless Steel Foot Pads, The Hand Grips are Metal-Plated to ABS Resin.
Measurement Style
Whole body, Right leg, Left leg, Right arm and Left arm
Measurement Range
150 ~ 1200Ω
Measurement System
Maximum
Capacity
Minimum
Graduation
Strain Gauge Load Cell
Accuracy at first calibration
200 kg / 0.1 kg 440 lb / 0.2lb
±0.2kg ±0.4lb
Clothes Weight
0-200 kg / 440lb 0.1 kg increments / 0.2 lb increments
Gender
Male / Female
Body Type
Standard / Athletic
Age
7~99 years old /1year increments
Height
Display
Print-out
Display
90 - 249 cm / 3 ft - 7 ft 11.5 in 1 cm increments / 0.5 in increments
Target Body Fat %
4~55%
Weight
0 - 200 kg / 440 lb 0.1 kg increments / 0.2 lb increments
Target Body Fat %
4~55%
Gender
Male / Female
Body Type
Standard / Athletic
Age
7 - 99 years old / 1 year increments
Height
90 - 249 cm / 3 ft - 7 ft 11.5 in 1 cm increments / 0.5 in increments
FAT%
1 - 75% / 0.1% increments
Body Type
Standard / Athletic
Gender
Male / Female
Age
7 - 99 years old / 1 year increments
Height
90 - 249 cm / 3 ft - 7 ft 11.5 in 1 cm increments / 0.5 in increments
Weight
2 - 200 kg / 4 – 440 lb 0.1 kg increments / 0.2 lb increments
BMI
0.1 increments
BMR
1 kJ increments / 1 kcal increments
Impedance *1
150 ~ 1200 Ω / 1Ω increments
FAT% *2
1 - 75% / 0.1% increments
Fat Mass *2
0.1 kg increments / 0.2 lb increments
FFM *2
0.1 kg increments / 0.2 lb increments
TBW
0.1 kg increments / 0.2 lb increments
Predicted Weight
0.1 kg increments / 0.2 lb increments
Predicted fat mass
0.1 kg increments / 0.2 lb increments
FAT TO LOSE/GAIN
0.1 kg increments / 0.2 lb increments
Predicted muscle Mass *2
0.1 kg increments / 0.2 lb increments
Others
Desirable Range for FAT% and FM
3 Rows, 5 Digits LCD
Output Data Interface
RS-232C (D-sub 9 pins male Connector)
Temperature Range of Usage
0ºC/35ºC
Power Consumption
Relative Humidity
17.5 W
BC-418
Power source
AC adaptor (included) Center Minus MODEL SA25-0535U CLASS 2
Input Voltage: 100-240 VAC 50/60 Hz 550mA Output Voltage: 5 VDC ± 0.3 V
Rated Current: 3.5 A No Load Input Voltage: 5 VDC ± 0.3 V
30% / 80% (without condensation)
Weight of Equipment
12kg
Size
Accuracy at first calibration
12Ω
Weighing Platform
377 X 343 X 83mm
830mm
Height
/
*1 This item displays Whole Body, Right Leg, Left Leg, Right Arm and Left Arm.
*2 This item displays Right Leg, Left Leg, Right Arm, Left Arm and Trunk.
The current BMR retrogression formula is a formula which acts on the principle of using the FFM value
from the results of body composition measurement according to the BIA, A good relationship is shown in
the BMR value based on actual breath analysis REE or R=0.9 (p<0.0001). These results were presented at the
First Annual Nutrition Week (American College of Nutrition, American Society for Clinical Nutrition,
American Society for Parenteral and Enteral Nutrition, North American Association for the Study of
Obesity) held in 2002 in San Diego.
NOTE: This model has been calibrated for those between ages of 18-84.
Those individuals outside of this age range may not be obtain accurate readings.
As shown in Figure 1: the REE (BMR) has a stronger relationship to the FFM than to body weight, and a
difference is visible between males and females in the distribution trends. We see that in principle that we
should calculate from the FFM rather than by the old formula centered on the relationship with weight.
<Fig: 2> Comparison of BMR Values from the TANITA Multiple regression model and Breath Analysis
(Presented at Nutrition Week Held in San Diego in 2002)
–