Filter
Top Products
Host . /body composition analyzer
*Gender, body type, height and age must be entered.
*Once all the necessary items of data have been entered, the unit will determine on the basis of age and gender whether to switch to Athlete or Standard mode.
Hence even if you choose Athlete mode, the unit may switch to Standard mode.
*If starting in Weight Only mode, only tare weight needs to be set.
LFCR?D
Set body type
5
Ex: standard
Host . /body composition analyzer
LF
CR02D
Set height
6
Ex: 179cm
Host . /body composition analyzer
LF
CR971003D
Set age
7
Ex: 34
Host . /body composition analyzer
LF
CR434D
Confirm settings
9
Host , . body composition analyzer
LF
CR2D
Host ,. body composition analyzer
LF
CR!2D
If commands accepted
If settings incorrect
Host , . body composition analyzer
LF
CR3D
Host , . body composition analyzer
LF
CR!3D
If commands accepted
If settings incorrect
Host , . body composition analyzer
LF
CR4D
Host , . body composition analyzer
LF
CR!4D
If commands accepted
If settings incorrect
Host , . body composition analyzer
LF
CR0.1000D
If commands accepted
Host , . body composition analyzer
LF
CR11D
Host , . body composition analyzer
LF
CR02D
Host , . body composition analyzer
LF
CR971003D
Host , . body composition analyzer
LF
CR434D
Host , . body composition analyzer
LF
CR816D
Host , if data settings incorrect . body composition analyzer
If settings incorrect
Ex: 18%
Host . /body composition analyzer
LF
CR816D
Host , . body composition analyzer
LF
CR6D
Host , . body composition analyzer
LF
CR!6D
If commands accepted
If settings incorrect
Set target BF
8
Switch on body composition analyzer.
1
Choose the units of measurement.
2
First, switch on the body composition analyzer.
ƽ
Check that the unit is in Remote mode.
Also check that the unit is connected properly to the computer.
Set tare weight
3
The tare weight need not be set if not required. It will then be treated as 0.
Ex: 1kg tare weight
Host . /body composition analyzer
LF
CR0.1000D
Ex: cm/kg
ƽ
Units of measurement cannot be set if tare weight and height have been set. The default setting is cm/kg.
Host . /body composition analyzer
LF
CR0U
Host , . body composition analyzer
LF
CR0D
Host , . body composition analyzer
LF
CR!D
If commands received
Host , . body composition analyzer
LF
CR0U
If settings incorrect
Host , . body composition analyzer
LF
CR!U
If commands received
If settings incorrect
Set gender
4
Ex: male
Host . /body composition analyzer
LF
CR11D
Host , . body composition analyzer
LF
CR1D
Host , . body composition analyzer
LF
CR!1D
If commands accepted
If settings incorrect
*If commands sent are unclear Host
,
commands returned
LF
CR!
a Example of Use
The body composition analyzer is used remotely as follows.