Filter
Top Products
English
1155
3.4 Batching
Place weighing product on the platform in Weighing mode and accept the
weight value in the batch memory by pressing the + key.
Place the next weighing product on the platform and press the + key to
accept the weight value in the batch memory, etc.
A full batch memory is recognised by the totalising character (Σ) in the
display.
Call up the total value
by pressing the Info key and then the + key.
The display then scrolls: Gross, Tare, Net and Quantity.
Cancel or end by pressing the CL key.
Clear the batch memory
by pressing the CL key and then the + key.
Batching with tare
Refer to 2.5.
An active tare weight is indicated by the letter "N" appearing in the display.
Autobatching (select function in Setting mode)
Place weighing product on the platform in Weighing mode and accept the
weight value in the batch memory by pressing the + key.
Place the next weighing product on the scale. The weight value is
automatically accepted in batch memory.Place the next weighing product on
the scale, etc.
Carry out a complete configuration of the batching function in
Setting mode (see separate description 470.702.078 User Mode).
3.5 Withdrawal weighing
Place a container with the weighing product on the platform.
Press the tare key.
Remove part of the weighing product.
The removed weight value is displayed with a negative sign.
Press the tare key again, etc.
Ba_3010_GB.qxd 03.04.2008 17:07 Seite 15