Sharp DK-KP82PH Microscope & Magnifier User Manual


 
25
NOTES FOR USERS IN THE U.K. AND IRELAND
The mains lead of this product is tted with a non-rewireable
(moulded) plugincorporating
a10A fuse. Should the fuseneed to
be replaced,a BSIor ASTAapproved BS 1362fuse marked
or
and of the same rating as above, which is also indicated on
the pin faceof the plug must be used.
Always re
t the fuse cover after replacing the fuse. Never use
the plug without the fusecover
tted.
In the unlikely event of the socket outlet in your home not being
compatible with the plug supplied, cut-off the mains plug and
t
an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed andthe cut-off
plug destroyedimmediately and disposed ofin a safe manner.
Under no circumstancesshould the cut-off plug be insertedelse
-
where into a 13A socket outlet as a serious electric shock may
occur.
To
t an appropriate plug to the mains lead, follow the instruc-
tions below:
IMPORTANT:
The wires in the mainslead are coloured inaccordance with the
following code:
Blue : Neutral
Brown : Live
As the colours ofthe wires in themains lead ofthis product may
not correspond with the coloured markings identifyingthe termi-
nals in your plug, proceed asfollows:
The wirewhich iscoloured blue mustbe connected tothe plug
terminal which is marked N or coloured black.
The wire which is coloured brown must be
connected to the
plug terminal which is marked L or colouredred.
Ensure that neither the brown nor the blue wire is connected to
the earth terminal in your three pin plug.
Before replacing the plugcover, make sure that:
If the new
d plug contains a fuse, its value isthesame as
that removed from thecut-off plug.
The cord grip is clamped over the sheath of the mains lead
and not simply overtheleadwires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELEC-
TRICIAN.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair, please
contactthe dealeror supplierfromwhomit waspurchased.Where
this is not possible, please visit our web-site www.sharp.co.uk/
customersupport.aspx
Customers without internet access may telephone 0845
880 0512
during of ce hours (or (01) 676 0648 if telephoning
from lreland).
Please note; all calls will be charged at local rate.
Certain replacement partsand accessories maybe obtained from
our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
In the unlikely event of this equipment requiringrepair during the
guarantee period, you will need to provide proof
of the date of
purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the
time of purchase.
For U.K. and Ireland customers
DK-KP82PH_OM_EN_SCA.indd 25 2013-02-26 07:33:26